Wheel Encoder With 1 cm min. Measuring – ENC-1-2-T-24

Autonics wheel encoder – ENC-1-2-T-24

Axial cable type, 250mm Wheel diameter, Totem pole

The Autonics wheel type incremental rotary Encoders ENC-1-2-T-24 has a 250 mm diameter Wheel and it helps to measure length or speed of continuously moving. The control output for this encoder is totem pole and the output phases are A, B. The maximum allowable revolution for this item is 5000 rpm. Maximum response frequency is 180 kHz. The Gear ratio for this product is 4:1. The axial cable type connection in this encoder makes it possible for operators to install it for most standard applications.

As a quick report, this incremental encoder provides:

• 250 mm Wheel diameter

• 4:1 Gear ratio

• Wheel type encoders ideal for measuring length or speed of continuously moving objects

• Output waveform of measured distance is proportional to International Weights and Measures (meters / inches)

• Power supply: 12-24 VDC ±5% (ripple P-P: max. 5%)

• IP50 ingress protection structure according to IEC standards

Connection

The Autonics incremental encoder ENC-1-2-T-24 features Axial cable type connection. This 4-wire cable is 5 mm in diameter and 2 meters in length.

Control output

The ENC-1-2-T-24 features Totem pole control output and it’s output phase is A, B.

Temperature

There are limitations in temperature and humidity in which ENC-1-2-T-24 encoder is used:

• Storage temperature: -25 … 85°C

• Storage humidity: 35 to 90%RH

• Ambient temperature: -10 … 70°C

• Ambient humidity: 35 to 85%RH

Environment resistance is rated at no freezing or condensation.

Industries / applications

• Packaging Machinery

• Rolling Machinery

• Textile Machinery

Click on the following link to view other Autonics Rotary Encoders products.