Door Sensor 0 to 10 m Sensing Distance, Relay Output – ADS-SE1

Autonics Automatic Door Side Sensor – ADS-SE1

1 channel, Relay contact output, Cable connector type

The Autonics ADS-SE1 automatic door side sensor is a through-beam sensor with its own controller. The sensor has long sensing distances of 10 m and provides stable detection even in high ambient lighting conditions of 100,000 lux. Push-to-connect wiring makes connecting the sensor and controller simple, and a one-touch automatic sensitivity adjustment function is included for easy setup.

As a quick report, this door sensor provides:

• Through-beam sensing type

• 0 to 10m Sensing distance
  

• ≥ Ø 20 mm Min. sensing target

• Infrared LED (850 nm modulated) Light source

• OUT 1 indicator (red), OUT 2 indicator (green)

• Cable connector Connection type

• Relay contact  control output

• IP30 ingress protection structure according to IEC standards

• ≈ 50 ms (from interrupted light) Response time

• ≈ 500 ms (from received light) Output holding time

• 12 – 24 VAC~ ± 10 %, 50 / 60 Hz / 12 – 24 VDC ± 10 % (ripple P-P: ≤ 10 %) Power supply

• AC: ≤ 2 VA / DC: ≤ 50 mA Power consumption

Body

This Autonics ADS-SE1 sensor‘s holder is made of Acrylonitrile butadiene styrene (ABS), its Lens is made of Polymethyl methacrylate (PMMA).

The housing and cover material of ADS-SE1 controller is Acrylonitrile butadiene styrene (ABS).

The ADS-SE1 features IP30 ingress protection.

Connection

The Autonics door sensor ADS-SE1 features standard cable type connection. This cable covers the sensor’s 1 wire. It is Ø2.4mm in diameter and 5 meters in length.

Sensing specifications

The mainimum distance that this door sensor can detect its standard sensing target, which is a ≥ Ø 20 mm piece of Opaque material, is 0 to 10 m. This so-called sensing distance differs from one sensing target to another, based on their material, size, etc.

Control output

The ADS-SE1 features Relay contact output.

Temperature

There are limitations in temperature and humidity in which ADS-SE1 photoelectric sensor is used:

• Storage temperature: -25 … 60°C

• Storage humidity: 35 to 85%RH

• Ambient temperature: -20 … 55°C

• Ambient humidity: 35 to 85%RH

Environment resistance is rated at no freezing or condensation.

Still want to know more? Click here to find out about Autonics Door Sensors working principles.